DAPAudio ORDERCODE D3710 Guide de l'utilisateur

Cameleon Bar 100 ORDERCODE 42700

8 Installation Remove all packing materials from the Cameleon Bar. Check that all foam and plastic padding is removed. Connect all cables. Always dis

9 Multiple Cameleon Bars (Master/Slave control) 1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulat

10 Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized show

11 Control Mode The fixtures are individually addressed on a data-link and connected to the controller. The fixtures respond to the DMX signal from

12 Operation via the remote (72704) not included The remote is necessary for the Cameleon Bar to function. 1 2 3 4

13 DMX Channel Setting Channel 1 – Dimmer 0-255 Dimmer from 0 – 100% Channel 2 – Red 0-255 Red from 0 – 100% Channel 3 – Green 0-255 Green from

14 No Light This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps below in sequence until a sol

15 Product Specification Model: Showtec Cameleon Bar 100 Power: 240V-50Hz (CE) Power consumption: 30 Watt Power connector: Schuko LED system: 239 LED

16 42708 Special XLR to small 3-pin cable 3m 42709 Endcap (when using the Cameleon outdoors, make sure the last device in a chain

Congratulations! You have bought a great, innovative product from Showtec. The Showtec Cameleon Bar 100 brings excitement to any venue. You can rely

1 2 2 4 4 5 5 6 6 6 7 8 8 8 8 8 8 9 9 10 10 11 11 12 13 13 13 14 14 15 Showtec Showtec Cameleon Bar 100™ Product Guide Warning...

2 Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts ar

3 IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized mod

4 OPERATING DETERMINATIONS This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve yo

5 Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly

6 Description of the device Features The Showtec Cameleon Bar 100 is a light effect with high output and great effects. • Power consumption: 30 Wat

7 Please make sure to obtain the XLR 3-pin to mini 3-pin cable (42708) to connect the device to DMX. Please make sure t